ToToTEK.COM

Another option would be to replace the 3.6V ni-cad battery with a battery holder capable of holding three AAA batteries in series. Recently released rechargable NiMH batteries that come pre-charged a ...

DX2 won't recognize >2G anyhow.
That's why we ask if 2x 2 GB works... Read before posting please. Smile

The DiskDual allows for 2 IDE devices to be connected. Usually you'll connect a CD/DVD playe ...

I was able to get a 2GB Jaz disk working with the DX2, but only when I used the DX2 to format it to a 100MB capacity. Somebody else that posted to CherryRoms claimed that they were able to get it wor ...

Can somebody summarize that translation? It was very difficult to understand. Does the USB-to-Floppy drive work in a GDSF7 or were there problems?

A small booklet could be used as an index from page numbers to games. Is anybody going to buy one of these and see how well it works in their copier?

Does anybody have a link for a English language site that sells these floppy drive replacements? Also, a clone of this for the Famicom Disk System would be nice.

How do you know for sure it does not work?

I've also looked into this, and kyuusaku is right. The floppy-based adapters require special device drivers that simply do not exist for the SF7. Now, i ...

What about a good video capture device? Is there a good video capture device for PC's that is good for retro gaming?

The GB Transferer 2 is still produced. The GB Transferer 1 used batteries for power and the parallel port for data transmission, while the GB Transferer 2 uses USB for power and the parallel port for ...

Why did Bung choose to use codes in this way? Were they too lazy to extend the GUI in a more user-friendly manner?

Why would you pay $70 for a fake SNES?

I agree with the CF recommendation. CF cards are inexpensive, max capacity for the DX2 (2GB), widely available, solid state, silent!!!, and power efficient... just like the SNES itself. I also recom ...

Let me get this straight. Are you using the following setup?
DX2 Parallel Port <==> Jaz Traveller <==> External SCSI 2GB Jaz Drive

You need to make sure that the SCSI termination and ...

have you tried a Jaz Traveller with a 2gb Jaz Drive (with disks formatted on a PC) and did it actually work good?

I remember only getting games to load from a 2GB Jaz drive when the disks were form ...

However, the zip drive can also be replaced with FAT32 disk drives attached to the DX2 via a Jaz Traveller, which is the same SCSI-to-parport adapter used in the Zip drives supported by the DX2. The ...