View previous topic :: View next topic |
Author |
Message |
Pickle
Joined: 29 Oct 2016 Posts: 1
|
Posted: Sat Oct 29, 2016 9:07 pm Post subject: 8 Wires FDS 3206 Add-On Chip V3 |
|
|
The page for this item isnt 100% clear.
Its states:
Quote: | 1) It no need to cut any wires on the Drive PCB. |
but then the first picture on the left has instructions to cut the traces.
I hope that the correct way to install this chip is by only following the last picture (number 3 going left to right)
Can anyone confirm this?
Another point on this mod. I have the v4 of the power board, so I know how to work around that write protection.
So if I do the power mod + the v3 chip I should be full mod (not half mod)? |
|
Back to top |
|
|
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Sun Dec 23, 2018 2:16 am Post subject: |
|
|
Yes, you need to mod both power board + drive board. Then it is full mod. No need to cut 2 wires mean on the drive board, not power board. |
|
Back to top |
|
|
|