View previous topic :: View next topic |
Author |
Message |
Genscher
Joined: 05 Mar 2006 Posts: 16 Location: Germany
|
Posted: Tue May 09, 2006 11:27 am Post subject: CiC Solder Question |
|
|
Today my SuperFlash Card Arrives.
I tried the Card with the T-Connector and Super Mario World 2, but it dosen't work, i only get a Green-TV Screen.
so i would like to solder the CIC ( iv'e desoldered from International Super Star Soccer ) to the Super Flash card..... and here is the Problem ^^. Whats the right way to solder it? A or B?
A)
OR
B) |
|
Back to top |
|
|
JohnDie
Joined: 12 Jul 2004 Posts: 28 Location: Germany
|
Posted: Tue May 09, 2006 3:33 pm Post subject: Re: CiC Solder Question |
|
|
Hi!
Option A should be the right way. As you can see, there's a notch in the left border of the white box printed on the Super Flash PCB. This denotes the side where Pin1 of the IC is located. The CIC itself has a small round "hole" in a corner close to a pin. This is pin 1 of the CIC.
I'm quite sure it's that way. But feel free to wait for more answers, maybe Tomy could confirm this?
EDIT: Do not use Super Mario World 2 with the T-Connector! Use a "simple" game without SRAM, for example Super Tennis or Mortal Kombat or Street Fighter II. Be sure to switch the switch at the T-Connector to the lower position to enable the CIC from the cart on the back.
Kind regards,
JohnDie |
|
Back to top |
|
|
toado
Joined: 27 Apr 2006 Posts: 10
|
|
Back to top |
|
|
|